Concrete, the single most widely-used building material in the world, has a history dating back to the Romans and ancient Egyptians. Given that concrete is used twice as much in construction over all other building materials, emphasis on quality, performance and sustainability is essential for the industry to grow and thrive.
One of the most important ingredients in high performance, long-lasting, durable and beautiful concrete produced today are concrete admixtures. Concrete admixtures are natural or manufactured chemicals or additives added during concrete mixing to enhance specific properties of the fresh or hardened concrete, such as workability, durability, or early and final strength.
DATASHEET
Silicate primer and thinner based on sol-silicate (combination of silica sol and water glass). It is used as a primer for highly absorbent substrates or partial surfaces or as a thinner for KEIM Soldalit® and KEIM Soldalit-Grob in the base coat on highly absorbent substrates. KEIM Soldalit-Fixativ is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.
Downloads
Universal, silicate-based facade paint with a sol-silicate binder (combination of silica sol and water glass) for organic, mineral and mixed substrates as well as ETICS. KEIM Soldalit is water-repellent, highly diffusible, lightfast, UV-stable and extremely weather-resistant with minimal soiling tendency. Organic content < 5%.
KEIM Soldalit is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.
Downloads
This conductive adhesive is a 1-part, heat-cured system. It is a silver grey, smooth, thixotropic paste that cures to form a hard, durable, and electrically conductive polymer. It bonds well to a wide variety of substances.
This PCB peelable solder mask is a synthetic latex product for the temporary masking of circuit areas and contacts against solder, rosin and cleaning fluids. This PCB mask provides effective protection for contacts, gold fingers and printed circuit card edges, and can easily be peeled off once the wave soldering process is complete, and after any subsequently applied conformal coating is sufficiently dry.
Technical Documents
860 is a CPU heat sink compound. Our thermal paste designed to reduce thermal resistance between irregular metal surfaces. Coupled with reasonable thermal conductivity, 860 has a soft consistency and a wide operating temperature range, which in some instances makes it the best thermal paste for CPUapplications.
Technical Documents
An EMC spray coating in convenient aerosol packaging. It is a solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate.
This silver conductive paint for plastic consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides superior high frequency shielding, strong corrosion resistance, and is suitable for use in marine environments.
This 2-part conductive epoxy paint is pigmented with highly conductive nickel flake. The cured paint is smooth and extremely durable. It is abrasion, scratch, and mar resistant. It is corrosion and chemically resistant. It adheres very strongly to metal, glass, ceramics, and most plastics.
Technical Documents
This carbon paint consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides strong corrosion resistance and is suitable for use in marine environments.
Technical Documents
832B is a general purpose, rigid, 2-part black epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies.
8310A is a conformal coating remover in a gel format. It removes most reworkable conformal coatings, such as thermoplastic (non-cross linked) acrylics, urethanes, and silicone-based conformal coatings. It also facilitates the removal of some thermoset coatings, like cross-linked silicones and polyurethanes, by softening or swelling the coat to aid with mechanical removal.
Technical Documents
This product contains 70% isopropyl alcohol, packaged in a convenient spray bottle for cleaning electronics. It effectively cleans ionic, polar and non-polar residues. It is safe on most painted surfaces, plastics, and elastomers. It leaves no residue and evaporates quickly relative to water. It is low toxicity compared to alternative solvents and is similarly relatively environmentally benign, being ozone safe with excellent “green solvent” scores.
Technical Documents
Read more
422C-340G is a 1-part, acrylic-silicone blend conformal coating spray that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in just 10 minutes. It may be removed with the right conformal coating remover (MG’s 8309 or 8310A) or soldered through for repair or rework.
4228 is a highly insulating dielectric coating with excellent arc and corona resistance. It is a low viscosity, 1-part coating that is easy to use and adheres well to many substrates.
This dielectric coating also protects transformers, coils, motor windings, and various electric generator parts against arc, corona, corrosion, and moisture.
Excellence Organisation Pvt Ltd
Excellence Organisation Pvt Ltd
A-1514, A-1515, Kailash Business Park, Park Site Road, Vikhroli (W), Mumbai – 400079
Need Help?
- Excellence Organisation Pvt Ltd
EXCELLENCE® Organisation Pvt Ltd . All right reserved. Powered by ComponentCart Solutions LLP.