Filter
Sort:
Show:
ADSIL Supercon Silicone Sealant

ADSIL Supercon Silicone Sealant

ADSIL Supercon 9 Silicone Sealant is a one-part, neutral- cure, architectural grade sealant. It easily extrudes in any weather and cures at ambient temperature by reaction with moisture in the air to form a durable, flexible silicone rubber seal. DATASHEET
Enquiry
ADSIL Neutral Silicone Sealant

ADSIL Neutral Silicone Sealant

A single-part, non-sag, neutral, room-temperature-curing sealant that forms in-place gaskets. With a temperature tolerance from -40 to 150OC, it also presents exceptional adhesion to a slew of materials. DATASHEET
Enquiry
ADSIL General Purpose Silicone Sealant

ADSIL General Purpose Silicone Sealant

ADSIL General Purpose RTV Silicone Sealant is a cost-effective acetoxy silicone sealant suitable for a range of general sealing and general glazing applications. It adheres to most common non-porous building materials.
  • General purpose industrial sealing applications:Gearbox flange joints, . air-conditioning ducting,solar water heater,busbody,Neon signs etc.
  • General Purpose construction applications:Aluminium window . sealing,roofing sealant, shop fronts and show cases sealing etc
DATASHEET
Enquiry
ADSIL Gap Filler Acrylic Sealant

ADSIL Gap Filler Acrylic Sealant

ADSIL Gap Filler Acrylic Sealant forms a tough,flexible,resilient bond to all building material surfaces. It has excellent resistance to water, weathering and moisture vapour.It cures to produce a flexible seal that is non-yellowing and mildew resistance. DATASHEET
Enquiry
Excellence BETONDUR 10B

Excellence BETONDUR 10B

  BETONDUR 10B is a highly effective water-reducing compound for promoting accelerated hardening and free flowing cement mortar, concrete, pavement tiles & block etc. It also gives early strength and improved final strength to the concrete structures. DATASHEET:
Enquiry
Sika Rep Microconcrete 4

Sika Rep Microconcrete 4

  SikaRep® Microcrete-4 is factory designed pourable, shrinkage compensated, high performance microconcrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement. DATASHEET
Enquiry
Sika Polysulphide-Pour Grade-4KG

Sika Polysulphide-Pour Grade-4KG

  Sika® Polysulphide, Pour Grade is a two component Polysulphide sealant. It is used for sealing expansion joints where large movement is anticipated in concrete construction and for joints between diverse construction materials. It is suitable for sealing joints subjected to vehicular traffic and is chemically resistant to water, fuels, oils and solvents. DATASHEET
Enquiry
Sika Multiseal Tape

Sika Multiseal Tape

 

Sika® MultiSeal AP is a self-adhesive, rubber modified bituminous sealing tape laminated with an aluminium foil on the upper side.

DATASHEET

Enquiry
Sika Monotop

Sika Monotop

  DUAL SHRINKAGE COMPENSATED, TROWELABLE FIBRE REINFORCED THIXOTROPIC REPAIR MORTAR. Sika MonoTop®-122 F trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. Sika MonoTop®-122 F is suitable for placing in thicknesses of 5mm to 50 mm vertically and 5-15mm overhead. DATASHEET
Enquiry
Sika Latex SBR

Sika Latex SBR

  Superior performance SBR based multipurpose polymer for waterproofing, repair and bonding. SikaLatex® SBR is a superior modified styrene butadiene emulsion to be mixed with cement slurry, cement mortar, concrete or cementitious grout for improved adhesion and water resistance properties. It is fully soluble in water and is added directly to the gauging water of slurry, mortar, concrete or grout. DATASHEET
Enquiry
Sika Grout

Sika Grout

 
HIGH PRECISION, SHRINKAGE COMPENSATED, POURABLE CEMENTITIOUS GROUT

SikaGrout®-214 IN S is a cement based 1-component, ready to mix, non-shrink, ready to use, pourable and flowable, expanding engineering grout in dry powder form. It is widely used for precision grouting in engineering objects subjected to static and dynamic loads.

  • Easy to use, ready to mix powder
  • Easy to mix, only add water
  • Adjustable consistency
DATASHEET
Enquiry
SIkaflex Construction+ Grey 600ml-Box

SIkaflex Construction+ Grey 600ml-Box

 
Sikaflex® Construction (AP) is a one part, moisture curing, elastic joint sealant based on polyurethane. It is suitable for indoor and outdoor applications.
DATASHEET
Enquiry
No Ox Id-A Special-1 GAL (3.78ltr)

No Ox Id-A Special-1 GAL (3.78ltr)

  NO-OX-ID “A-SPECIAL” is the electrical contact grease of choice in new RoHS Compliant electrical installations and maintenance because of its excellent performance in keeping metals free from corrosion. This electrical grease has been used for over 65 years to prevent corrosion in electrical connectors from low micro-power electronics to high voltage switch gear. This conductive grease prevents the formation of oxides, sulfides and other corrosion deposits on copper and aluminum surfaces and conductors can be prevented with its use. Product Data Sheet Material Safety Data Sheet    
Enquiry
Powerflow 600 Combi with PRD

Powerflow 600 Combi with PRD

 
A 1-component manual bead dispenser for 310/400mL cartridges and 310/400/600mL sachets.

Specifications:

  • Weight: 0.9-1.1kg / 2.0-2.3lbs
  • Barrel Length: 236mm-389mm / 9.3in-15.3in
  • Maximum Thrust: 2.5kN
  • Handle Material: Epoxy Coated Aluminum
  • Barrel Material: Anodized Aluminum
  • Barrel Type: Anodized Aluminum / Clear Plastic
  • Tool Component Approvals: REACH
  • Cartridge Capacity: 310mL (10.5oz), 400mL (13.5oz)
  • Sachet Capacity: 310ml (10.5oz), 400mL (13.5oz), 600mL (20.3oz)
  • Mechanical Advantage Ratio: (12:1)
  • Standard Color: Black/Grey
  • Nozzle Dimension: ø38mm / 1.5in
Enquiry
Powerflow 310ml Cartridge with PRD

Powerflow 310ml Cartridge with PRD

 
A 1-component manual bead dispenser for 310/400mL cartridges.

Specifications:

  • Weight: 0.75-0.79kg / 1.65-1.74lbs
  • Frame Length: 233mm-274mm / 9.3in-15.0in
  • Maximum Thrust: 2.5kN
  • Pressure Relief Device (PRD)
  • Handle Material: Epoxy Coated Aluminum
  • Frame Material: Epoxy Coated Steel
  • Tool Component Approvals: REACH
  • Cartridge Capacity: 310mL (10.5oz), 400mL (13.5oz)
  • Mechanical Advantage Ratio: (12:1)
  • Viscosity: Low/Medium
  • Standard Color: Blue/Black
  • Nozzle Dimension: ø27-31mm / 1.1-1.2in
Enquiry
Airflow 3 Sachet 600ml

Airflow 3 Sachet 600ml

 
A 1-component pneumatic bead dispenser for 310/400/600mL sachets.

Specifications:

  • Weight: 0.78-0.82kg / 1.7-1.8lbs
  • Barrel Length: 297-436mm / 11.7-17.2in
  • Maximum Thrust: 1.5kN
  • Maximum Pneumatic Pressure: 6.8bar (100psi)
  • Handle Material: Glass Filled Nylon
  • Barrel Material: Anodized Aluminum
  • Tool Component Approvals: CE, REACH
  • Sachet Capacity: 310mL (10.5oz), 400mL (13.5oz), 600mL (20.3oz)
  • Viscosity: Low/Medium
  • Standard Colour: Black/Grey
  • Nozzle Dimension: ø38mm / 1.5in
Enquiry

Filter Products

Search Products

Categories