- Clear filters
- Electronic Protection
- Floor Coatings & Corrosion Protection
- Insulation - Heat & Corrosion Protection
This conductive adhesive is a 1-part, heat-cured system. It is a silver grey, smooth, thixotropic paste that cures to form a hard, durable, and electrically conductive polymer. It bonds well to a wide variety of substances.
This PCB peelable solder mask is a synthetic latex product for the temporary masking of circuit areas and contacts against solder, rosin and cleaning fluids. This PCB mask provides effective protection for contacts, gold fingers and printed circuit card edges, and can easily be peeled off once the wave soldering process is complete, and after any subsequently applied conformal coating is sufficiently dry.
Technical Documents
860 is a CPU heat sink compound. Our thermal paste designed to reduce thermal resistance between irregular metal surfaces. Coupled with reasonable thermal conductivity, 860 has a soft consistency and a wide operating temperature range, which in some instances makes it the best thermal paste for CPUapplications.
Technical Documents
An EMC spray coating in convenient aerosol packaging. It is a solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate.
This silver conductive paint for plastic consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides superior high frequency shielding, strong corrosion resistance, and is suitable for use in marine environments.
This 2-part conductive epoxy paint is pigmented with highly conductive nickel flake. The cured paint is smooth and extremely durable. It is abrasion, scratch, and mar resistant. It is corrosion and chemically resistant. It adheres very strongly to metal, glass, ceramics, and most plastics.
Technical Documents
This carbon paint consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides strong corrosion resistance and is suitable for use in marine environments.
Technical Documents
832B is a general purpose, rigid, 2-part black epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies.
8310A is a conformal coating remover in a gel format. It removes most reworkable conformal coatings, such as thermoplastic (non-cross linked) acrylics, urethanes, and silicone-based conformal coatings. It also facilitates the removal of some thermoset coatings, like cross-linked silicones and polyurethanes, by softening or swelling the coat to aid with mechanical removal.
Technical Documents
This product contains 70% isopropyl alcohol, packaged in a convenient spray bottle for cleaning electronics. It effectively cleans ionic, polar and non-polar residues. It is safe on most painted surfaces, plastics, and elastomers. It leaves no residue and evaporates quickly relative to water. It is low toxicity compared to alternative solvents and is similarly relatively environmentally benign, being ozone safe with excellent “green solvent” scores.
Technical Documents
Read more
422C-340G is a 1-part, acrylic-silicone blend conformal coating spray that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in just 10 minutes. It may be removed with the right conformal coating remover (MG’s 8309 or 8310A) or soldered through for repair or rework.
4228 is a highly insulating dielectric coating with excellent arc and corona resistance. It is a low viscosity, 1-part coating that is easy to use and adheres well to many substrates.
This dielectric coating also protects transformers, coils, motor windings, and various electric generator parts against arc, corona, corrosion, and moisture.
419E-340G is an acrylic-based circuit board coating spray that is designed to enhance circuit boards’ environmental protection. This circuit board coating spray is one of the few coatings on the market that is certified to both UL 746E and IPC CC 830 standards. It is easy to apply, can be handled in 15 minutes, and cures to a durable, flexible, and smooth finish. It can be readily removed with the right strippers, or soldered through for repair or rework.
832HT is a general purpose, rigid, black, 2-part high temperature epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies.
This product is designed for high temperature applications and is especially useful when extreme physical strength and chemical resistance are required. It also provides excellent electrical insulation and protects components from static discharge, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.
Read more
Excellence Organisation Pvt Ltd
Excellence Organisation Pvt Ltd
A-1316, Kailas Business Park, Park Site Road, Surya Nagar, Vikhroli (W),Mumbai – 400 079
Need Help?
Connect with Tanmay Bamane
Mobile No: +91 91675 93529
Telephone No: +91 22 2517 1594
Email ID: marketing@excellence-corp.com
- Excellence Organisation Pvt Ltd
EXCELLENCE® Organisation Pvt Ltd . All right reserved. Powered by ComponentCart Solutions LLP.