Multi-purpose adhesive sealant with a wide adhesion range
Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.
- Bonds well to a wide variety of substrates
- Resistant to ageing
- Can be sanded and painted
Multipurpose sealant and adhesive based on hybrid polyurethane
DESCRIPTION
Sikaflex®-127 is a single component, elastic, moisture curing, hybrid polyurethane based construction sealant and adhesive. Its good adhesion to most construction materials and good weathering resistance makes it especially suitable for a variety of interior and exterior sealing applications.
Datasheet
Read more
Multipurpose elastic adhesive and joint sealant
Sikaflex®-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. Internal and external use.
- Movement capability of ± 35 %
- Bonds well to defined substrates without surface pre-treatment
- Good mechanical and weathering resistance
DESCRIPTION
Sikadur®-32 LP is a solvent-free, two component bonding agent, based on selected epoxy resins. Complies with ASTM C 881-78 type II, Grade 2 Class B+C
USES
Sikadur®-32 LP may only be used by experienced professionals.
Sikadur®-32 LP provides a bond of far greater strength
than the tensile strength of the concrete itself. Therefore it is suitable for use as a structural bonding agent
for :
▪ New to existing concrete
▪ Mortar
▪ Steel, Iron
Datasheet
Read more
Anti-CRAK® HP 67/36 is designed to provide crack control, flexural performance, toughness, and impact-resistance to slabs-on-ground, commercial and industrial floors, pavements, precast concrete, manufactured products, and other applications.
• Produced with Owens Corning® Cem-FIL® AR-glass, the alkaliresistant glass is specifically designed for concrete reinforcement
and lives up to a 50-plus-year reputation.
Datasheet
Read more
Anti-CRAK® HD is designed to provide plastic shrinkage crack control and high-quality surface finish to decorative hardscapes, pool decks,sidewalks, slab-on-grade, and other concrete applications. Produced with Owens Corning® Cem-FIL® AR-glass, the alkali-resistant glass is specifically designed for concrete reinforcement, and lives up to its 50-plus years.
Datasheet
Read more
Cem-FIL® 70 is a special purpose AR-glass fiber chopped strand designed for mixing with cement and other materials where superior fiber dispersion is required in wet or dry formulations.
Read more
- Produced with Owens Corning® AR-glass, the alkali-resistant glass is specifically designed for concrete reinforcement, and lives up to a 50-plus-year reputation.
- Designed for high fiber dispersion with a variety of materials.
- Incorporates easily
This conductive adhesive is a 1-part, heat-cured system. It is a silver grey, smooth, thixotropic paste that cures to form a hard, durable, and electrically conductive polymer. It bonds well to a wide variety of substances.
This PCB peelable solder mask is a synthetic latex product for the temporary masking of circuit areas and contacts against solder, rosin and cleaning fluids. This PCB mask provides effective protection for contacts, gold fingers and printed circuit card edges, and can easily be peeled off once the wave soldering process is complete, and after any subsequently applied conformal coating is sufficiently dry.
Technical Documents
860 is a CPU heat sink compound. Our thermal paste designed to reduce thermal resistance between irregular metal surfaces. Coupled with reasonable thermal conductivity, 860 has a soft consistency and a wide operating temperature range, which in some instances makes it the best thermal paste for CPUapplications.
Technical Documents
An EMC spray coating in convenient aerosol packaging. It is a solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate.
This silver conductive paint for plastic consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides superior high frequency shielding, strong corrosion resistance, and is suitable for use in marine environments.
This 2-part conductive epoxy paint is pigmented with highly conductive nickel flake. The cured paint is smooth and extremely durable. It is abrasion, scratch, and mar resistant. It is corrosion and chemically resistant. It adheres very strongly to metal, glass, ceramics, and most plastics.
Technical Documents
This carbon paint consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides strong corrosion resistance and is suitable for use in marine environments.
Technical Documents
832B is a general purpose, rigid, 2-part black epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies.
Excellence Organisation Pvt Ltd
Excellence Organisation Pvt Ltd
A-1514, A-1515, Kailash Business Park, Park Site Road, Vikhroli (W), Mumbai – 400079
Need Help?
- Excellence Organisation Pvt Ltd
EXCELLENCE® Organisation Pvt Ltd . All right reserved. Powered by ComponentCart Solutions LLP.