Filter
Sort:
Show:
ADSIL Supercon Silicone Sealant

ADSIL Supercon Silicone Sealant

ADSIL Supercon 9 Silicone Sealant is a one-part, neutral- cure, architectural grade sealant. It easily extrudes in any weather and cures at ambient temperature by reaction with moisture in the air to form a durable, flexible silicone rubber seal. DATASHEET
Enquiry
ADSIL Neutral Silicone Sealant

ADSIL Neutral Silicone Sealant

A single-part, non-sag, neutral, room-temperature-curing sealant that forms in-place gaskets. With a temperature tolerance from -40 to 150OC, it also presents exceptional adhesion to a slew of materials. DATASHEET
Enquiry
ADSIL General Purpose Silicone Sealant

ADSIL General Purpose Silicone Sealant

ADSIL General Purpose RTV Silicone Sealant is a cost-effective acetoxy silicone sealant suitable for a range of general sealing and general glazing applications. It adheres to most common non-porous building materials.
  • General purpose industrial sealing applications:Gearbox flange joints, . air-conditioning ducting,solar water heater,busbody,Neon signs etc.
  • General Purpose construction applications:Aluminium window . sealing,roofing sealant, shop fronts and show cases sealing etc
DATASHEET
Enquiry
ADSIL Gap Filler Acrylic Sealant

ADSIL Gap Filler Acrylic Sealant

ADSIL Gap Filler Acrylic Sealant forms a tough,flexible,resilient bond to all building material surfaces. It has excellent resistance to water, weathering and moisture vapour.It cures to produce a flexible seal that is non-yellowing and mildew resistance. DATASHEET
Enquiry
Sika Primer 3N

Sika Primer 3N

  Sika® Primer-3 N is a solvent-based, 1-componentprimer. Suitable for use in hot and tropical climatic conditions. DATASHEET
Enquiry
Sika Polysulphide-Pour Grade-4KG

Sika Polysulphide-Pour Grade-4KG

  Sika® Polysulphide, Pour Grade is a two component Polysulphide sealant. It is used for sealing expansion joints where large movement is anticipated in concrete construction and for joints between diverse construction materials. It is suitable for sealing joints subjected to vehicular traffic and is chemically resistant to water, fuels, oils and solvents. DATASHEET
Enquiry
Sika Multiseal Tape

Sika Multiseal Tape

 

Sika® MultiSeal AP is a self-adhesive, rubber modified bituminous sealing tape laminated with an aluminium foil on the upper side.

DATASHEET

Enquiry
SIkaflex Construction+ Grey 600ml-Box

SIkaflex Construction+ Grey 600ml-Box

 
Sikaflex® Construction (AP) is a one part, moisture curing, elastic joint sealant based on polyurethane. It is suitable for indoor and outdoor applications.
DATASHEET
Enquiry
Sikaflex 221

Sikaflex 221

 
Multi-purpose adhesive sealant with a wide adhesion range

Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.

  • Bonds well to a wide variety of substrates
  • Resistant to ageing
  • Can be sanded and painted
Pretreatment Chart Flyer or Leaflet Brochure
Enquiry
Sikaflex 127

Sikaflex 127

  Multipurpose sealant and adhesive based on hybrid polyurethane DESCRIPTION Sikaflex®-127 is a single component, elastic, moisture curing, hybrid polyurethane based construction sealant and adhesive. Its good adhesion to most construction materials and good weathering resistance makes it especially suitable for a variety of interior and exterior sealing applications. Datasheet
Enquiry
Sikaflex 11FC+ Grey

Sikaflex 11FC+ Grey

 
Multipurpose elastic adhesive and joint sealant

Sikaflex®-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. Internal and external use.

  • Movement capability of ± 35 %
  • Bonds well to defined substrates without surface pre-treatment
  • Good mechanical and weathering resistance
Datasheet
Enquiry
No Ox Id-A Special-1 GAL (3.78ltr)

No Ox Id-A Special-1 GAL (3.78ltr)

  NO-OX-ID “A-SPECIAL” is the electrical contact grease of choice in new RoHS Compliant electrical installations and maintenance because of its excellent performance in keeping metals free from corrosion. This electrical grease has been used for over 65 years to prevent corrosion in electrical connectors from low micro-power electronics to high voltage switch gear. This conductive grease prevents the formation of oxides, sulfides and other corrosion deposits on copper and aluminum surfaces and conductors can be prevented with its use. Product Data Sheet Material Safety Data Sheet    
Enquiry
Powerflow 600 Combi with PRD

Powerflow 600 Combi with PRD

 
A 1-component manual bead dispenser for 310/400mL cartridges and 310/400/600mL sachets.

Specifications:

  • Weight: 0.9-1.1kg / 2.0-2.3lbs
  • Barrel Length: 236mm-389mm / 9.3in-15.3in
  • Maximum Thrust: 2.5kN
  • Handle Material: Epoxy Coated Aluminum
  • Barrel Material: Anodized Aluminum
  • Barrel Type: Anodized Aluminum / Clear Plastic
  • Tool Component Approvals: REACH
  • Cartridge Capacity: 310mL (10.5oz), 400mL (13.5oz)
  • Sachet Capacity: 310ml (10.5oz), 400mL (13.5oz), 600mL (20.3oz)
  • Mechanical Advantage Ratio: (12:1)
  • Standard Color: Black/Grey
  • Nozzle Dimension: ø38mm / 1.5in
Enquiry
Powerflow 310ml Cartridge with PRD

Powerflow 310ml Cartridge with PRD

 
A 1-component manual bead dispenser for 310/400mL cartridges.

Specifications:

  • Weight: 0.75-0.79kg / 1.65-1.74lbs
  • Frame Length: 233mm-274mm / 9.3in-15.0in
  • Maximum Thrust: 2.5kN
  • Pressure Relief Device (PRD)
  • Handle Material: Epoxy Coated Aluminum
  • Frame Material: Epoxy Coated Steel
  • Tool Component Approvals: REACH
  • Cartridge Capacity: 310mL (10.5oz), 400mL (13.5oz)
  • Mechanical Advantage Ratio: (12:1)
  • Viscosity: Low/Medium
  • Standard Color: Blue/Black
  • Nozzle Dimension: ø27-31mm / 1.1-1.2in
Enquiry
Airflow 3 Sachet 600ml

Airflow 3 Sachet 600ml

 
A 1-component pneumatic bead dispenser for 310/400/600mL sachets.

Specifications:

  • Weight: 0.78-0.82kg / 1.7-1.8lbs
  • Barrel Length: 297-436mm / 11.7-17.2in
  • Maximum Thrust: 1.5kN
  • Maximum Pneumatic Pressure: 6.8bar (100psi)
  • Handle Material: Glass Filled Nylon
  • Barrel Material: Anodized Aluminum
  • Tool Component Approvals: CE, REACH
  • Sachet Capacity: 310mL (10.5oz), 400mL (13.5oz), 600mL (20.3oz)
  • Viscosity: Low/Medium
  • Standard Colour: Black/Grey
  • Nozzle Dimension: ø38mm / 1.5in
Enquiry
9410 – 1 Part Epoxy, Electrically Conductive Adhesive, High Tg

9410 – 1 Part Epoxy, Electrically Conductive Adhesive, High Tg

 
This conductive adhesive is a 1-part, heat-cured system. It is a silver grey, smooth, thixotropic paste that cures to form a hard, durable, and electrically conductive polymer. It bonds well to a wide variety of substances.
Enquiry

Filter Products

Search Products

Categories