Filter
Sort:
Show:
ADSIL Supercon Silicone Sealant

ADSIL Supercon Silicone Sealant

ADSIL Supercon 9 Silicone Sealant is a one-part, neutral- cure, architectural grade sealant. It easily extrudes in any weather and cures at ambient temperature by reaction with moisture in the air to form a durable, flexible silicone rubber seal. DATASHEET
Enquiry
ADSIL Neutral Silicone Sealant

ADSIL Neutral Silicone Sealant

A single-part, non-sag, neutral, room-temperature-curing sealant that forms in-place gaskets. With a temperature tolerance from -40 to 150OC, it also presents exceptional adhesion to a slew of materials. DATASHEET
Enquiry
ADSIL General Purpose Silicone Sealant

ADSIL General Purpose Silicone Sealant

ADSIL General Purpose RTV Silicone Sealant is a cost-effective acetoxy silicone sealant suitable for a range of general sealing and general glazing applications. It adheres to most common non-porous building materials.
  • General purpose industrial sealing applications:Gearbox flange joints, . air-conditioning ducting,solar water heater,busbody,Neon signs etc.
  • General Purpose construction applications:Aluminium window . sealing,roofing sealant, shop fronts and show cases sealing etc
DATASHEET
Enquiry
ADSIL Gap Filler Acrylic Sealant

ADSIL Gap Filler Acrylic Sealant

ADSIL Gap Filler Acrylic Sealant forms a tough,flexible,resilient bond to all building material surfaces. It has excellent resistance to water, weathering and moisture vapour.It cures to produce a flexible seal that is non-yellowing and mildew resistance. DATASHEET
Enquiry
Sika Primer 3N

Sika Primer 3N

  Sika® Primer-3 N is a solvent-based, 1-componentprimer. Suitable for use in hot and tropical climatic conditions. DATASHEET
Enquiry
Sika Polysulphide-Pour Grade-4KG

Sika Polysulphide-Pour Grade-4KG

  Sika® Polysulphide, Pour Grade is a two component Polysulphide sealant. It is used for sealing expansion joints where large movement is anticipated in concrete construction and for joints between diverse construction materials. It is suitable for sealing joints subjected to vehicular traffic and is chemically resistant to water, fuels, oils and solvents. DATASHEET
Enquiry
Sika Multiseal Tape

Sika Multiseal Tape

 

Sika® MultiSeal AP is a self-adhesive, rubber modified bituminous sealing tape laminated with an aluminium foil on the upper side.

DATASHEET

Enquiry
SIkaflex Construction+ Grey 600ml-Box

SIkaflex Construction+ Grey 600ml-Box

 
Sikaflex® Construction (AP) is a one part, moisture curing, elastic joint sealant based on polyurethane. It is suitable for indoor and outdoor applications.
DATASHEET
Enquiry
Sikaflex 221

Sikaflex 221

 
Multi-purpose adhesive sealant with a wide adhesion range

Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.

  • Bonds well to a wide variety of substrates
  • Resistant to ageing
  • Can be sanded and painted
Pretreatment Chart Flyer or Leaflet Brochure
Enquiry
Sikaflex 127

Sikaflex 127

  Multipurpose sealant and adhesive based on hybrid polyurethane DESCRIPTION Sikaflex®-127 is a single component, elastic, moisture curing, hybrid polyurethane based construction sealant and adhesive. Its good adhesion to most construction materials and good weathering resistance makes it especially suitable for a variety of interior and exterior sealing applications. Datasheet
Enquiry
Sikaflex 11FC+ Grey

Sikaflex 11FC+ Grey

 
Multipurpose elastic adhesive and joint sealant

Sikaflex®-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. Internal and external use.

  • Movement capability of ± 35 %
  • Bonds well to defined substrates without surface pre-treatment
  • Good mechanical and weathering resistance
Datasheet
Enquiry
Sikadur Combiflex Adhesive IN

Sikadur Combiflex Adhesive IN

  Sikadur-Combiflex® Adhesive IN is a 2-part epoxy based thixotropic adhesive for bonding the SikadurCombiflex® SG modified flexible Polyolefin (FPO) waterproofing tapes to different substrates. Internal and external use. Application temperature range +10 °C to +40 °C. It is part of the Sikadur-Combiflex® SG System. Datasheet
Enquiry
KEIM Design Fixativ

KEIM Design Fixativ

 

For decorative coatings in glaze painting technique or to provide conventional coatings with a special finish.

Ready-to-use glaze concentrate on sol-silicate basis in accordance with DIN EN1062-1 for interior and exterior use. For decorative glaze coatings and for finishing conventional top coats. Excellent for impressive colour designs and creative solutions. In combination with KEIM Design-Base and/or KEIM Design-Fixativ, KEIM Design-Lasur can be adjusted to the desired glaze effect as desired. KEIM Design-Lasur is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.
Enquiry
KEIM Concretal – W

KEIM Concretal – W

KEIM Concretal-W

Sol-silicate-based one-component paint with absolutely lightfast pigments for opaque protective concrete coatings. Concretal-W has a high water resistance. Protection principle: Water protection, chloride protection, weathering protection. KEIM Concretal-W is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.

KEIM Concretal-W is a sol-silicate one component paint which is highly water-repellent. It protects against water, chloride and weather influences.

Downloads
Enquiry
KEIM Concretal-Lasur

KEIM Concretal-Lasur

 

KEIM Concretal-Lasur

Sol-silicate based one-component paint for glazing or covering thin coats. Particularly economical, preventive concrete protection. For glazing design applications or to compensate for visual defects, thinning with KEIM Concretal-Base or KEIM Concretal-Fixativ in any ratio is possible. KEIM Concretal-Lasur is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.

Downloads
Enquiry
Powerflow 600 Combi with PRD

Powerflow 600 Combi with PRD

 
A 1-component manual bead dispenser for 310/400mL cartridges and 310/400/600mL sachets.

Specifications:

  • Weight: 0.9-1.1kg / 2.0-2.3lbs
  • Barrel Length: 236mm-389mm / 9.3in-15.3in
  • Maximum Thrust: 2.5kN
  • Handle Material: Epoxy Coated Aluminum
  • Barrel Material: Anodized Aluminum
  • Barrel Type: Anodized Aluminum / Clear Plastic
  • Tool Component Approvals: REACH
  • Cartridge Capacity: 310mL (10.5oz), 400mL (13.5oz)
  • Sachet Capacity: 310ml (10.5oz), 400mL (13.5oz), 600mL (20.3oz)
  • Mechanical Advantage Ratio: (12:1)
  • Standard Color: Black/Grey
  • Nozzle Dimension: ø38mm / 1.5in
Enquiry

Filter Products

Search Products

Categories