BETONDUR 10B is a highly effective water-reducing compound for promoting accelerated hardening and free flowing cement mortar, concrete, pavement tiles & block etc. It also gives early strength and improved final strength to the concrete structures.
DATASHEET:
Read more
DUAL SHRINKAGE COMPENSATED, TROWELABLE FIBRE REINFORCED THIXOTROPIC REPAIR MORTAR.
Sika MonoTop®-122 F trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. Sika MonoTop®-122 F is suitable for placing in thicknesses of 5mm to 50 mm vertically and 5-15mm overhead.
DATASHEET
Read more
Superior performance SBR based multipurpose polymer for waterproofing, repair and bonding.
SikaLatex® SBR is a superior modified styrene butadiene emulsion to be mixed with cement slurry, cement mortar, concrete or cementitious grout for improved adhesion and water resistance properties. It is fully soluble in water and is added directly to the gauging water of slurry, mortar, concrete or grout.
DATASHEET
Read more
HIGH PRECISION, SHRINKAGE COMPENSATED, POURABLE CEMENTITIOUS GROUT
SikaGrout®-214 IN S is a cement based 1-component, ready to mix, non-shrink, ready to use, pourable and flowable, expanding engineering grout in dry powder form. It is widely used for precision grouting in engineering objects subjected to static and dynamic loads.
- Easy to use, ready to mix powder
- Easy to mix, only add water
- Adjustable consistency
Multi-purpose adhesive sealant with a wide adhesion range
Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.
- Bonds well to a wide variety of substrates
- Resistant to ageing
- Can be sanded and painted
Multipurpose sealant and adhesive based on hybrid polyurethane
DESCRIPTION
Sikaflex®-127 is a single component, elastic, moisture curing, hybrid polyurethane based construction sealant and adhesive. Its good adhesion to most construction materials and good weathering resistance makes it especially suitable for a variety of interior and exterior sealing applications.
Datasheet
Read more
Multipurpose elastic adhesive and joint sealant
Sikaflex®-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. Internal and external use.
- Movement capability of ± 35 %
- Bonds well to defined substrates without surface pre-treatment
- Good mechanical and weathering resistance
This conductive adhesive is a 1-part, heat-cured system. It is a silver grey, smooth, thixotropic paste that cures to form a hard, durable, and electrically conductive polymer. It bonds well to a wide variety of substances.
This PCB peelable solder mask is a synthetic latex product for the temporary masking of circuit areas and contacts against solder, rosin and cleaning fluids. This PCB mask provides effective protection for contacts, gold fingers and printed circuit card edges, and can easily be peeled off once the wave soldering process is complete, and after any subsequently applied conformal coating is sufficiently dry.
Technical Documents
860 is a CPU heat sink compound. Our thermal paste designed to reduce thermal resistance between irregular metal surfaces. Coupled with reasonable thermal conductivity, 860 has a soft consistency and a wide operating temperature range, which in some instances makes it the best thermal paste for CPUapplications.
Technical Documents
An EMC spray coating in convenient aerosol packaging. It is a solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate.
This silver conductive paint for plastic consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides superior high frequency shielding, strong corrosion resistance, and is suitable for use in marine environments.
This 2-part conductive epoxy paint is pigmented with highly conductive nickel flake. The cured paint is smooth and extremely durable. It is abrasion, scratch, and mar resistant. It is corrosion and chemically resistant. It adheres very strongly to metal, glass, ceramics, and most plastics.
Technical Documents
Excellence Organisation Pvt Ltd
Excellence Organisation Pvt Ltd
A-1514, A-1515, Kailash Business Park, Park Site Road, Vikhroli (W), Mumbai – 400079
Need Help?
- Excellence Organisation Pvt Ltd
EXCELLENCE® Organisation Pvt Ltd . All right reserved. Powered by ComponentCart Solutions LLP.