- Clear filters
- Construction
- Electronic Protection
- Exterior Painting & Corrosion Protection
- Interior and Exterior Painting
For decorative coatings in glaze painting technique or to provide conventional coatings with a special finish.
Ready-to-use glaze concentrate on sol-silicate basis in accordance with DIN EN1062-1 for interior and exterior use. For decorative glaze coatings and for finishing conventional top coats. Excellent for impressive colour designs and creative solutions. In combination with KEIM Design-Base and/or KEIM Design-Fixativ, KEIM Design-Lasur can be adjusted to the desired glaze effect as desired. KEIM Design-Lasur is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.
KEIM Concretal-W
Sol-silicate-based one-component paint with absolutely lightfast pigments for opaque protective concrete coatings. Concretal-W has a high water resistance. Protection principle: Water protection, chloride protection, weathering protection. KEIM Concretal-W is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.
KEIM Concretal-W is a sol-silicate one component paint which is highly water-repellent. It protects against water, chloride and weather influences.
Downloads
KEIM Concretal-Lasur
Sol-silicate based one-component paint for glazing or covering thin coats. Particularly economical, preventive concrete protection. For glazing design applications or to compensate for visual defects, thinning with KEIM Concretal-Base or KEIM Concretal-Fixativ in any ratio is possible. KEIM Concretal-Lasur is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.
This conductive adhesive is a 1-part, heat-cured system. It is a silver grey, smooth, thixotropic paste that cures to form a hard, durable, and electrically conductive polymer. It bonds well to a wide variety of substances.
This PCB peelable solder mask is a synthetic latex product for the temporary masking of circuit areas and contacts against solder, rosin and cleaning fluids. This PCB mask provides effective protection for contacts, gold fingers and printed circuit card edges, and can easily be peeled off once the wave soldering process is complete, and after any subsequently applied conformal coating is sufficiently dry.
Technical Documents
860 is a CPU heat sink compound. Our thermal paste designed to reduce thermal resistance between irregular metal surfaces. Coupled with reasonable thermal conductivity, 860 has a soft consistency and a wide operating temperature range, which in some instances makes it the best thermal paste for CPUapplications.
Technical Documents
An EMC spray coating in convenient aerosol packaging. It is a solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate.
This silver conductive paint for plastic consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides superior high frequency shielding, strong corrosion resistance, and is suitable for use in marine environments.
This 2-part conductive epoxy paint is pigmented with highly conductive nickel flake. The cured paint is smooth and extremely durable. It is abrasion, scratch, and mar resistant. It is corrosion and chemically resistant. It adheres very strongly to metal, glass, ceramics, and most plastics.
Technical Documents
This carbon paint consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides strong corrosion resistance and is suitable for use in marine environments.
Technical Documents
832B is a general purpose, rigid, 2-part black epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies.
8310A is a conformal coating remover in a gel format. It removes most reworkable conformal coatings, such as thermoplastic (non-cross linked) acrylics, urethanes, and silicone-based conformal coatings. It also facilitates the removal of some thermoset coatings, like cross-linked silicones and polyurethanes, by softening or swelling the coat to aid with mechanical removal.
Technical Documents
This product contains 70% isopropyl alcohol, packaged in a convenient spray bottle for cleaning electronics. It effectively cleans ionic, polar and non-polar residues. It is safe on most painted surfaces, plastics, and elastomers. It leaves no residue and evaporates quickly relative to water. It is low toxicity compared to alternative solvents and is similarly relatively environmentally benign, being ozone safe with excellent “green solvent” scores.
Technical Documents
Read more
422C-340G is a 1-part, acrylic-silicone blend conformal coating spray that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in just 10 minutes. It may be removed with the right conformal coating remover (MG’s 8309 or 8310A) or soldered through for repair or rework.
Excellence Organisation Pvt Ltd
Excellence Organisation Pvt Ltd
A-1514, A-1515, Kailash Business Park, Park Site Road, Vikhroli (W), Mumbai – 400079
Need Help?
- Excellence Organisation Pvt Ltd
EXCELLENCE® Organisation Pvt Ltd . All right reserved. Powered by ComponentCart Solutions LLP.