- Clear filters
- Bonding & Expansion Joint
- Construction Chemical
- Electronic Protection
- Lubrication & Electronic Protection
BETONDUR 10B is a highly effective water-reducing compound for promoting accelerated hardening and free flowing cement mortar, concrete, pavement tiles & block etc. It also gives early strength and improved final strength to the concrete structures.
DATASHEET:
Read more
DUAL SHRINKAGE COMPENSATED, TROWELABLE FIBRE REINFORCED THIXOTROPIC REPAIR MORTAR.
Sika MonoTop®-122 F trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. Sika MonoTop®-122 F is suitable for placing in thicknesses of 5mm to 50 mm vertically and 5-15mm overhead.
DATASHEET
Read more
Superior performance SBR based multipurpose polymer for waterproofing, repair and bonding.
SikaLatex® SBR is a superior modified styrene butadiene emulsion to be mixed with cement slurry, cement mortar, concrete or cementitious grout for improved adhesion and water resistance properties. It is fully soluble in water and is added directly to the gauging water of slurry, mortar, concrete or grout.
DATASHEET
Read more
HIGH PRECISION, SHRINKAGE COMPENSATED, POURABLE CEMENTITIOUS GROUT
SikaGrout®-214 IN S is a cement based 1-component, ready to mix, non-shrink, ready to use, pourable and flowable, expanding engineering grout in dry powder form. It is widely used for precision grouting in engineering objects subjected to static and dynamic loads.
- Easy to use, ready to mix powder
- Easy to mix, only add water
- Adjustable consistency
Sikadur-Combiflex® Adhesive IN is a 2-part epoxy based thixotropic adhesive for bonding the SikadurCombiflex® SG modified flexible Polyolefin (FPO) waterproofing tapes to different substrates. Internal and external use. Application temperature range +10 °C to +40 °C. It is part of the Sikadur-Combiflex® SG System.
Datasheet
Read more
This conductive adhesive is a 1-part, heat-cured system. It is a silver grey, smooth, thixotropic paste that cures to form a hard, durable, and electrically conductive polymer. It bonds well to a wide variety of substances.
This PCB peelable solder mask is a synthetic latex product for the temporary masking of circuit areas and contacts against solder, rosin and cleaning fluids. This PCB mask provides effective protection for contacts, gold fingers and printed circuit card edges, and can easily be peeled off once the wave soldering process is complete, and after any subsequently applied conformal coating is sufficiently dry.
Technical Documents
860 is a CPU heat sink compound. Our thermal paste designed to reduce thermal resistance between irregular metal surfaces. Coupled with reasonable thermal conductivity, 860 has a soft consistency and a wide operating temperature range, which in some instances makes it the best thermal paste for CPUapplications.
Technical Documents
8481 is a premium, carbon-filled, silicone-free electrically conductive grease. It lubricates, reduces contact resistance, repels moisture, prevents static buildup, and is a powerful corrosion inhibitor. It is thermally stable and will not separate because of temperature cycling.
Technical Documents
846 is an economical carbon conductive grease that provides lubrication for electrical contacts, reduces contact resistance, repels moisture, inhibits corrosion, and prevents static buildup.
Technical Documents
An EMC spray coating in convenient aerosol packaging. It is a solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate.
This silver conductive paint for plastic consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides superior high frequency shielding, strong corrosion resistance, and is suitable for use in marine environments.
This 2-part conductive epoxy paint is pigmented with highly conductive nickel flake. The cured paint is smooth and extremely durable. It is abrasion, scratch, and mar resistant. It is corrosion and chemically resistant. It adheres very strongly to metal, glass, ceramics, and most plastics.
Technical Documents
This carbon paint consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. It provides strong corrosion resistance and is suitable for use in marine environments.
Technical Documents
832B is a general purpose, rigid, 2-part black epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies.
Excellence Organisation Pvt Ltd
Excellence Organisation Pvt Ltd
A-1316, Kailas Business Park, Park Site Road, Surya Nagar, Vikhroli (W),Mumbai – 400 079
Need Help?
Connect with Tanmay Bamane
Mobile No: +91 91675 93529
Telephone No: +91 22 2517 1594
Email ID: marketing@excellence-corp.com
- Excellence Organisation Pvt Ltd
EXCELLENCE® Organisation Pvt Ltd . All right reserved. Powered by ComponentCart Solutions LLP.