Filter
Sort:
Show:
ADSIL Supercon Silicone Sealant

ADSIL Supercon Silicone Sealant

ADSIL Supercon 9 Silicone Sealant is a one-part, neutral- cure, architectural grade sealant. It easily extrudes in any weather and cures at ambient temperature by reaction with moisture in the air to form a durable, flexible silicone rubber seal. DATASHEET
Enquiry
ADSIL Neutral Silicone Sealant

ADSIL Neutral Silicone Sealant

A single-part, non-sag, neutral, room-temperature-curing sealant that forms in-place gaskets. With a temperature tolerance from -40 to 150OC, it also presents exceptional adhesion to a slew of materials. DATASHEET
Enquiry
ADSIL General Purpose Silicone Sealant

ADSIL General Purpose Silicone Sealant

ADSIL General Purpose RTV Silicone Sealant is a cost-effective acetoxy silicone sealant suitable for a range of general sealing and general glazing applications. It adheres to most common non-porous building materials.
  • General purpose industrial sealing applications:Gearbox flange joints, . air-conditioning ducting,solar water heater,busbody,Neon signs etc.
  • General Purpose construction applications:Aluminium window . sealing,roofing sealant, shop fronts and show cases sealing etc
DATASHEET
Enquiry
ADSIL Gap Filler Acrylic Sealant

ADSIL Gap Filler Acrylic Sealant

ADSIL Gap Filler Acrylic Sealant forms a tough,flexible,resilient bond to all building material surfaces. It has excellent resistance to water, weathering and moisture vapour.It cures to produce a flexible seal that is non-yellowing and mildew resistance. DATASHEET
Enquiry
Sika Polysulphide-Pour Grade-4KG

Sika Polysulphide-Pour Grade-4KG

  Sika® Polysulphide, Pour Grade is a two component Polysulphide sealant. It is used for sealing expansion joints where large movement is anticipated in concrete construction and for joints between diverse construction materials. It is suitable for sealing joints subjected to vehicular traffic and is chemically resistant to water, fuels, oils and solvents. DATASHEET
Enquiry
Sika Multiseal Tape

Sika Multiseal Tape

 

Sika® MultiSeal AP is a self-adhesive, rubber modified bituminous sealing tape laminated with an aluminium foil on the upper side.

DATASHEET

Enquiry
SIkaflex Construction+ Grey 600ml-Box

SIkaflex Construction+ Grey 600ml-Box

 
Sikaflex® Construction (AP) is a one part, moisture curing, elastic joint sealant based on polyurethane. It is suitable for indoor and outdoor applications.
DATASHEET
Enquiry
Sikadur Combiflex Adhesive IN

Sikadur Combiflex Adhesive IN

  Sikadur-Combiflex® Adhesive IN is a 2-part epoxy based thixotropic adhesive for bonding the SikadurCombiflex® SG modified flexible Polyolefin (FPO) waterproofing tapes to different substrates. Internal and external use. Application temperature range +10 °C to +40 °C. It is part of the Sikadur-Combiflex® SG System. Datasheet
Enquiry
Owens Corning Anti Crak HP 67/36 Glass Fibre – 5kg

Owens Corning Anti Crak HP 67/36 Glass Fibre – 5kg

  Anti-CRAK® HP 67/36 is designed to provide crack control, flexural performance, toughness, and impact-resistance to slabs-on-ground, commercial and industrial floors, pavements, precast concrete, manufactured products, and other applications. • Produced with Owens Corning® Cem-FIL® AR-glass, the alkaliresistant glass is specifically designed for concrete reinforcement and lives up to a 50-plus-year reputation. Datasheet
Enquiry
Cemfil-Anti-Crack HD 12 Glass Fibre (25*600grm bag)

Cemfil-Anti-Crack HD 12 Glass Fibre (25*600grm bag)

  Anti-CRAK® HD is designed to provide plastic shrinkage crack control and high-quality surface finish to decorative hardscapes, pool decks,sidewalks, slab-on-grade, and other concrete applications. Produced with Owens Corning® Cem-FIL® AR-glass, the alkali-resistant glass is specifically designed for concrete reinforcement, and lives up to its 50-plus years. Datasheet
Enquiry
Cem-FIL 70 3mm

Cem-FIL 70 3mm

  Cem-FIL® 70 is a special purpose AR-glass fiber chopped strand designed for mixing with cement and other materials where superior fiber dispersion is required in wet or dry formulations.
  • Produced with Owens Corning® AR-glass, the alkali-resistant glass is specifically designed for concrete reinforcement, and lives up to a 50-plus-year reputation.
  • Designed for high fiber dispersion with a variety of materials.
  • Incorporates easily
Datasheet
Enquiry
Powerflow 600 Combi with PRD

Powerflow 600 Combi with PRD

 
A 1-component manual bead dispenser for 310/400mL cartridges and 310/400/600mL sachets.

Specifications:

  • Weight: 0.9-1.1kg / 2.0-2.3lbs
  • Barrel Length: 236mm-389mm / 9.3in-15.3in
  • Maximum Thrust: 2.5kN
  • Handle Material: Epoxy Coated Aluminum
  • Barrel Material: Anodized Aluminum
  • Barrel Type: Anodized Aluminum / Clear Plastic
  • Tool Component Approvals: REACH
  • Cartridge Capacity: 310mL (10.5oz), 400mL (13.5oz)
  • Sachet Capacity: 310ml (10.5oz), 400mL (13.5oz), 600mL (20.3oz)
  • Mechanical Advantage Ratio: (12:1)
  • Standard Color: Black/Grey
  • Nozzle Dimension: ø38mm / 1.5in
Enquiry
Powerflow 310ml Cartridge with PRD

Powerflow 310ml Cartridge with PRD

 
A 1-component manual bead dispenser for 310/400mL cartridges.

Specifications:

  • Weight: 0.75-0.79kg / 1.65-1.74lbs
  • Frame Length: 233mm-274mm / 9.3in-15.0in
  • Maximum Thrust: 2.5kN
  • Pressure Relief Device (PRD)
  • Handle Material: Epoxy Coated Aluminum
  • Frame Material: Epoxy Coated Steel
  • Tool Component Approvals: REACH
  • Cartridge Capacity: 310mL (10.5oz), 400mL (13.5oz)
  • Mechanical Advantage Ratio: (12:1)
  • Viscosity: Low/Medium
  • Standard Color: Blue/Black
  • Nozzle Dimension: ø27-31mm / 1.1-1.2in
Enquiry
Airflow 3 Sachet 600ml

Airflow 3 Sachet 600ml

 
A 1-component pneumatic bead dispenser for 310/400/600mL sachets.

Specifications:

  • Weight: 0.78-0.82kg / 1.7-1.8lbs
  • Barrel Length: 297-436mm / 11.7-17.2in
  • Maximum Thrust: 1.5kN
  • Maximum Pneumatic Pressure: 6.8bar (100psi)
  • Handle Material: Glass Filled Nylon
  • Barrel Material: Anodized Aluminum
  • Tool Component Approvals: CE, REACH
  • Sachet Capacity: 310mL (10.5oz), 400mL (13.5oz), 600mL (20.3oz)
  • Viscosity: Low/Medium
  • Standard Colour: Black/Grey
  • Nozzle Dimension: ø38mm / 1.5in
Enquiry
9410 – 1 Part Epoxy, Electrically Conductive Adhesive, High Tg

9410 – 1 Part Epoxy, Electrically Conductive Adhesive, High Tg

 
This conductive adhesive is a 1-part, heat-cured system. It is a silver grey, smooth, thixotropic paste that cures to form a hard, durable, and electrically conductive polymer. It bonds well to a wide variety of substances.
Enquiry
862 – Peelable Solder Mask

862 – Peelable Solder Mask

 
This PCB peelable solder mask is a synthetic latex product for the temporary masking of circuit areas and contacts against solder, rosin and cleaning fluids. This PCB mask provides effective protection for contacts, gold fingers and printed circuit card edges, and can easily be peeled off once the wave soldering process is complete, and after any subsequently applied conformal coating is sufficiently dry.
Enquiry

Filter Products

Search Products

Categories